Define your top navigation in Apperance > Menus
Welcome message!

Lightweight Slat

Available on XT®, Tapered Bore or Q-D® Hubs.

Occasionally the need arises for small diameter slat type pulleys which are used in small unloading and loading conveyors. VAN GORP has designed a light weight slat pulley in 4″ – 5 1/8″ – 6″ diameters. Since the diameter is so small, it is impossible to use gussets in this pulley, but the individual slat wing principle is applied. If an excessive amount of moist, sticky material such as clay or bulk fertilizer falls on the pulley and belt, it is possible to stop the conveyor and then clean the material out of the wing openings. This pulley is offered with solid bore hubs in the 4″, 5 1/8″ and 6″ diameters and a XT15 hub in the 6″ diameter. Solid bores have one key-way and two set screws in each hub.

light-slat